In its simplest form, a cam mechanism consists of following number of links

A. 1

B. 2

C. 3

D. 4

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. When a body is subjected to transverse vibrations, the stress induced in a body will be
  2. In a vibrating system, if the actual damping coefficient is 40 N/m/s and critical damping coefficient…
  3. The coriolis component of acceleration leads the sliding velocity by
  4. A motor car moving at a certain speed takes a left turn in a curved path. If the engine rotates in the…
  5. In higher pair, the relative motion is
  6. In vibration isolation system, if ω/ωn > 1, then the phase difference between the transmitted…
  7. A machine mounted on a single coil spring has a period of free vibration of tp . If the spring is cut…
  8. The critical speed of a shaft depends upon its
  9. The cam follower generally used in aircraft engines is
  10. The factional torque for square thread at the mean radius r while raising load W is given by
  11. Lower pairs are those which have
  12. Hammer blow
  13. For S.H.M. cam, the acceleration of the follower at the ends of the stroke and aimed stroke respectively,…
  14. A higher pair has__________.
  15. The Ackerman steering gear mechanism is preferred to the Davis steering gear mechanism, because
  16. The Klein's method of construction for reciprocating engine mechanism
  17. A torsional system with discs of moment of inertia I₁ and I₂ as shown in the below figure,…
  18. Efficiency of a screw jack is given by
  19. The pair is known as a higher pair, when the relative motion between the elements of a pair is
  20. The relation between the controlling force (Fc) and radius of rotation (r) for a stable spring controlled…
  21. The contact ratio is given by
  22. When the sleeve of a Porter governor moves downwards, the governor speed
  23. The frictional torque transmitted in a conical pivot bearing, considering uniform wear, is
  24. When the addenda on pinion and wheel is such that the path of approach and path of recess are half of…
  25. Open pairs are those which have
  26. In a steam engine, the link constitutes a
  27. The ratio of maximum fluctuation of speed to the mean speed is called
  28. Which of the following is an inversion of a single slider crank chain?
  29. The acceleration of a particle moving with simple harmonic motion, at any instant is given by
  30. For two governors A and B, the lift of sleeve of governor A is more than that of governor B, for a given…