Home
Current Affairs January 2024

What is the correct answer?

4

On a grading curve, the gap grading is represented by

A. A horizontal line

B. A vertical line

C. N.W. inclined line

D. N.E. inclined line

Correct Answer :

A. A horizontal line


Related Questions

What is the correct answer?

4

A continuous beam is deemed to be a deep beam when the ratio of effective span to overall depth (1/D) is less than

A. 1.5

B. 2.0

C. 2.5

D. 3.0

What is the correct answer?

4

The maximum thickness of concrete floor of a cement warehouse, is

A. 10 cm

B. 15 cm

C. 20 cm

D. 25 cm

What is the correct answer?

4

'Ware house pack' of cement means

A. Full capacity of the ware house

B. Pressure exertion of the bags of upper layers

C. Pressure compaction of the bags on lower layers

D. Packing the ware house

What is the correct answer?

4

The produce impermeable concrete

A. Thorough mixing of concrete is required

B. Proper compaction of concrete is required

C. Proper curing of concrete is required

D. All the above

What is the correct answer?

4

Air entrainment in the concrete increases

A. Workability

B. Strength

C. The effects of temperature variations

D. The unit weight

What is the correct answer?

4

Cement used for normal concrete construction, is obtained by burning a mixture of

A. Siliceous and argillaceous materials

B. Argillaceous and calcareous materials

C. Siliceous and calcareous materials

D. Siliceous, argillaceous and calcareous materials

What is the correct answer?

4

The surface where two successive placements of concrete meet, is known as

A. Contraction joint

B. Expansion joint

C. Construction joint

D. Both (a) and (b)

What is the correct answer?

4

For the design of retaining walls, the minimum factor of safety against overturning is taken as

A. 1.5

B. 2.0

C. 2.5

D. 3.0

What is the correct answer?

4

Minimum grade of concrete to be used in reinforced concrete as per IS: 4561978 is

A. M 15

B. M 20

C. M 10

D. M 25

What is the correct answer?

4

The compaction of concrete, improves

A. Density

B. Strength

C. Durability

D. All the above

What is the correct answer?

4

Setting time of cement increases by adding

A. Gypsum

B. Hydrogen peroxide

C. Calcium chloride

D. Sodium oxide

What is the correct answer?

4

Curing a concrete for long period ensures better

A. Volume stability

B. Strength

C. Water resistance

D. All the above

What is the correct answer?

4

The main reinforcement in the toe of a T-shaped R C. retaining wall is provided on
(i) Top face parallel to the wall
(ii) Top face perpendicular to the wall
(iii) Bottom face parallel to the wall
(iv) Bottom face perpendicular to the wall The correct answer is

A. Only (ii) is correct

B. (i) and (ii) are correct

C. (iii) and (iv) are correct

D. Only (iv) is correct

What is the correct answer?

4

Pick up the correct statement from the following:

A. Segregation is necessary for a workable concrete

B. Consistency does not affect the workability of concrete

C. If the concrete mix is dry, the slump is maximum

D. None of these

What is the correct answer?

4

Pick up the incorrect statement from the following. While performing preliminary test on concrete

A. Proportions of the material and water should be the same as to be used at the work site

B. Cement should be mixed by hand in order to maintain uniformity

C. Concrete mix should be stored in air-tight containers

D. Concrete ingredients should be kept at a temperature of 37° ± 2°C

What is the correct answer?

4

Horizontal construction joints in concrete walls are generally provided at

A. Soffit level

B. Window sill level

C. Floor level

D. All the above

What is the correct answer?

4

According to ISI recommendations, the maximum depth of stress block for balanced section of a beam of effective depth d is

A. 0.43 d

B. 0.55 d

C. 0.68 d

D. 0.85 d

What is the correct answer?

4

Maximum quantity of water needed per 50 kg of cement for M 15 grade of concrete is

A. 28 liters

B. 30 liters

C. 32 liters

D. 34 liters

What is the correct answer?

4

The lower water cement ratio in concrete, introduces

A. Smaller creep and shrinkage

B. Greater density and smaller permeability

C. Improved frost resistance

D. All the above

What is the correct answer?

4

On a grading curve, the gap grading is represented by

A. A horizontal line

B. A vertical line

C. N.W. inclined line

D. N.E. inclined line

What is the correct answer?

4

The final operation of finishing floors, is known as

A. Screeding

B. Floating

C. Trowelling

D. Finishing

What is the correct answer?

4

According to IS: 4561978, the flexural strength of concrete is

A. Directly proportional to compressive strength

B. Inversely proportional to compressive strength

C. Directly proportional to square root of compressive strength

D. Inversely proportional to square root of compressive strength

What is the correct answer?

4

According to IS: 4561978, the maximum reinforcement in a column is

A. 2 %

B. 4 %

C. 6 %

D. 8 %

What is the correct answer?

4

Hydration of cement is due to chemical action of water with

A. Tricalcium silicate and dicalcium silicate

B. Dicalcium silicate and tricalcium aluminate

C. Tricalcium aluminate and tricalcium alumino ferrite

D. All the above

What is the correct answer?

4

The individual variation between test strength of sample should not be more than

A. ± 5 % of average

B. ± 10 % of average

C. ± 15 % of average

D. ± 20 % of average

What is the correct answer?

4

The void ratio of

A. Single size coarse aggregate is roughly 0.45

B. Graded coarse aggregate is roughly 0.040

C. Fine aggregate is roughly 0.45

D. All the above

What is the correct answer?

4

Proper proportioning of concrete, ensures

A. Desired strength and workability

B. Desired durability

C. Water tightness of the structure

D. All the above

What is the correct answer?

4

An aggregate is said to be flaky, if its least dimension is less than

A. 2/3 mean dimension

B. 3/4 mean dimension

C. 3/5 mean dimension

D. 5/8 mean dimension

What is the correct answer?

4

Pick up the incorrect statement from the following:

A. Space between the exterior walls of a warehouse and bag piles should be 30 cm

B. Cement bags should preferably be piled on wooden planks

C. Width and height of the pile should not exceed 3 m and 2.70 m respectively

D. None of these

What is the correct answer?

4

Maximum percentage reinforcement in case of slabs is limited to

A. 2

B. 4

C. 6

D. 8