Thorough mixing of concrete is required
Proper compaction of concrete is required
Proper curing of concrete is required
All the above
D. All the above
Deflect downward
Deflect upward
Deflect downward or upward
None of the above
2.0 to 3.5
3.5 to 5.0
5.0 to 7.0
6.0 to 8.5
Siliceous aggregates, has higher co-efficient of expansion
Igneous aggregates, has intermediate coefficient of expansion
Lime stones, has lowest co-efficient of expansion
All the above
Shales
Fly ash
Pumicite
All the above
Less than 1
Between 1 and 1.5
Between 1.5 and 2
Greater than 2
Depends upon the amount of water used in the mix
Does not depend upon the quality of cement mixed with aggregates
Does not depend upon the quantity of cement mixed with aggregates
All the above
0.207 l
0.293 l
0.707 l
0.793 l From the driving end of pile which rests on the ground
Less
More
Equal
None of the above
30 %
40 %
50 %
60 %
High percentage of C3S and low percentage of C2S cause rapid hardening
High percentage of C3S and low percentage of C2S make the cement less resistive to chemical attack
Low percentage of C3S and high percentage of C2S contribute to slow hardening
All the above
Fineness test
Consistency test
Setting time test
Soundness test
5 kg/cm2
8 kg/cm2
10 kg/cm2
15 kg/cm2
Sedimentary rocks
Metamorphic rocks
Igneous rocks
Volcanic source
Bending moment and shear
Bending moment and torsion
Shear and torsion
Bending moment, shear and torsion
Segregation is necessary for a workable concrete
Consistency does not affect the workability of concrete
If the concrete mix is dry, the slump is maximum
None of these
Moist aggregates
Very dry aggregates
Dry aggregates
Saturated surface dry aggregate
10 mm
15 mm
25 mm
13 mm
Water cement paste hardens due to hydration
During hardening cement binds the aggregates together
Cement provides strength, durability and water tightness to the concrete
All the above
0.03 %
0.1 %
0.3 %
3 %
7 kg
14 kg
21 kg
35 kg
Sand stones may be divided into calcareous, siliceous and ferruginous sand stones
Concrete using sand stones, cracks due to excessive shrinkage
Broken bricks produce a concrete having good fire resisting qualities
All the above
Flexural tensile strength
Direct tensile strength
Compressive strength
Split tensile strength
Lean mixes bleed more as compared to rich ones.
Bleeding can be minimized by adding pozzolana finer aggregate
Bleeding can be increased by addition 'of calcium chloride
None of the above
M 100
M 150
M 200
M 250
2 %
4 %
6 %
10 %
Made with cement concrete
Thick and reinforced
Thin and heavily reinforced
Thick and heavily reinforced
Ferrous sulphate
Potassium chloride
Ammonia
Nitric acid
20 times
25 times
30 times
50 times
Concrete for which preliminary tests are conducted, is called controlled concrete
Bulking of sand depends upon the fineness of grains
Concrete mix 1 : 6 : 12, is used for mass concrete in piers
All the above
Colour
Strength
Controlling setting time
None of these