Slaked lime contains calcium hydroxide
Quick lime contains calcium oxide
Slaked lime may be obtained from quick lime
All the above
D. All the above
Slacking
Setting
Hydraulicity
Calcining
Quartz
Mica
Gypsum
None of the above
To remove moisture
To remove carbonic acid
By roasting in heaps
All the above
Setting time of cement
Soundness of cement
Tensile strength of cement
Compressive strength of cement
The theory of formation of concrete is based on the phenomena of formation of voids
The bulking of sand is taken into account while volumetric proportioning of the aggregates
The dry sand and the sand completely flooded with water, have practically the same volume
All the above
Hydraulic lime
Fat lime
Quick lime
Pure lime
Plastics are chemical resistant
Plastics are durable
Plastics are ductile
Plastics are excellent electric insulators
10 %
15 %
20 %
25 %
Sandy clay, calcareous clay, pure clay
Calcareous clay, pure clay, sandy clay
Pure clay, sandy clay, calcareous clay
None of these
Only (i)
Both (i) and (ii)
Both (i) and (iii)
All (i), (ii) and (iii)
Keeping it exposed to air
Immersing the lime in water
Crushing the lime lumps
None of these
A.C. pipes, G.I. pipes, C.I. pipes, PVC pipes
C.I. pipes, G.I. pipes, A.C. pipes, PVC pipes
C.I. pipes, G.I. pipes, PVC pipes, A.C. pipes
None of these
Strength
Durability
Workability
Water content
8% moisture content
10% moisture content
12% moisture content
14% moisture content
To increase the initial setting time of cement paste in concrete
To decrease the initial setting time of cement paste in concrete
To render the concrete more water tight
To improve the workability of concrete mix
Steel
Stainless steel
High test plastic
Chromium plate
20 %
15 %
10 %
None of these
Linseed oil
Water
Varnish
None of the above
Wane
Torn grain
Diagonal grain
Chipmark
Soft
Hard
Light
Heavy
Tri-calcium silicate
Di-calcium silicate
Tri-calcium aluminate
Tetra-calcium alumino ferrite
Corrugated sheet iron is made by passing plain sheets between grooved rollers
Strength and stiffness of corrugated sheets are considerably increased
Corrugated sheets are generally used on slanting roofs
All the above
1.5% to 5.5%
0.05% to 1.75%
0.250 %
None to these
3.5 N/mm²
7.0 N/mm²
10.5 N/mm²
14.0 N/mm²
The low voltage porcelain is prepared by wet process
The high voltage porcelain is prepared by dry process
The low voltage porcelain is prepared by dry process
None of the above
Carving out designs on timber planks
Chemically treating timber planks
Thick layer of superior wood glued to inferior wood
Thin layer of superior wood glued to inferior wood
It possesses less compressive strength
Its initial setting time is about one hour
Its final setting time is about 10 hours
All the above
Structural works in beams
Small sized water pipes
Columns and struts
None to these
0.30
0.40
0.50
0.60
1.5 to 2.0
2.0 to 2.5
2.5 to 3.0
3.0 to 3.5