Soft
Hard
Light
Heavy
D. Heavy
To remove moisture
To remove carbonic acid
By roasting in heaps
All the above
Under burnt
Over burnt
Kutcha
None of these
2 grades
4 grades
8 grades
10 grades
Carving out designs on timber planks
Chemically treating timber planks
Thick layer of superior wood glued to inferior wood
Thin layer of superior wood glued to inferior wood
Oil paint
Distemper
Spirit varnish
None to these
Preparation of clay
Moulding of clay
Drying of bricks
Burning of bricks
Switch block
Insulating tubes
Lamp sockets
All of these
Earthen ware
Stone ware
Refractory clay
All the above
Stone masonry
Brick walls
Both (A) and (B)
Neither (A) nor (B)
10
12
15
17
Enamel paints
Aluminium paints
Asbestos paints
Cement paints
Bessemer pig
Grey or foundry pig
White or forge pig
Mottled pig
Water proofing
Damp proofing
Both (A) and (B)
Neither (A) nor (B)
The lime in excess makes the cement unsound and causes the cement to expand and disintegrate
The silica in excess makes the cement stronger but its setting time also increases
The excess amount of alumina weakens the cement
All the above
Has good strength along the panel only
Can be spilt in the plane of the panel
Has greater impact resistance to blows than ordinary wood
Cannot be bent more easily than ordinary wood of same thickness
Distempers
Water proof cement paints
Enamel paints
Cellulose paints
Tri-calcium silicate
Gypsum
Di-calcium silicate
Tri-calcium aluminate
Higher resistance to chemical attack
Lower heat of hydration
Lower shrinkage on drying
All the above
Sandy clay, calcareous clay, pure clay
Calcareous clay, pure clay, sandy clay
Pure clay, sandy clay, calcareous clay
None of these
Trowel
Square
Bolster
Scutch
Clamp
Bull's kiln
Hoffman's kiln
None of these
Knots
Rindgalls
Burls
None of these
An oxide of iron paint
A mixture of white lead and lead paint
A special paint
Cement paint
Hydrogen
Nitrogen
Oxygen
All of these
Be durable
Be free from clay
Resist action of acids
All the above
Dampness
Efflorescence
Disintegration
All of these
100 to 150 N/cm2
100 to 130°C
Both (A) and (B)
Neither (A) nor (B)
75 kg/cm2
90 kg/cm2
100 kg/cm2
120 kg/cm2
Durability
Colour
Smoothness
Glassy face
1.5% to 5.5%
0.5% to 1.75%
0.1% to 0.25%
None to these