Enamel paints
Aluminium paints
Asbestos paints
Cement paints
C. Asbestos paints
Burning of lime stone
Burning of kankar
Adding water to quick lime
Calcination of pure clay
Alumina
Silica
Iron
Magnesia
Sapwood
Cambium layer
Heart wood
None to these
Ply wood
Shishum wood
Deodar wood
Teak wood
Cant
Deal
Baulk
Strip
Hard
Soft
Porous
Impervious
Plutonic rocks
Hypabyssal rocks
Volcanic rocks
Igneous rocks
Clay
Lime stone
Argillaceous iron ore
All the above
1200 kg
1500 kg
1800 kg
2000 kg
Cast iron
Wrought iron
Steel
All the above
(i) and (iv)
(ii) and (iii)
(i) and (ii)
(iii) and (iv)
1.50% to 5.6%
0.05% to 1.75%
0.25 %
None to these
Tri-calcium silicate
Tri-calcium aluminate
Tetra-calcium alumino-ferrite
Di-calcium silicate
Parallel
Perpendicular
Radial
None of these
Decomposed laterite
Crushed granite
Water bound pebbles
Air weathered rock
Sulphur
Carbon
Phosphorus
Silicon
Only (i)
Both (i) and (ii)
Both (i) and (iii)
All (i), (ii) and (iii)
Soft
Hard
Light
Heavy
Tin
Zinc
Glaze
Coal tar
Rust is due to formation of oxides
Cast iron oxidises less
Steel oxidises most
All the above
The plywoods do not split or crack due to changes in atmosphere
The commercial plywoods are available upto 150 cm wide and upto 300 cm long
The plywoods possess uniform tensile strength in all directions
All the above
Hard
Tough
Heavy
Light
Closer
Queen closer
King closer
Prince closer
Gypsum
Calcium chloride
Calcium carbonate
None of the above
Steel
Stainless steel
High test plastic
Chromium plate
Actinolite asbestos
Amosite asbestos
Anthophylite asbestos
All the above
Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38%
The bulking of fine sand is more than that of coarse sand
If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing
All the above
Ordinary Portland cement
Low heat cement
Rapid hardening cement
Sulphate resisting cement
Cementation process
Crucible process
Bessemer process
Open hearth process
Cast steel
Bessemer steel
Mild steel
Whitworth compressed steel