Sedimentary rock
Igneous rock
Metamorphic rock
Stratified rock
C. Metamorphic rock
Carbon
Silicon
Phosphorus and manganese
All the above
Gypsum
Calcium chloride
Calcium carbonate
None of the above
Calcium oxide
Silica
Clay
Water
Innermost annular rings around the pith
Portion of timber between heartwood and cambium layer
Thin layers below the bark
Thin fibre which extends from the pith outwards and holds the annular rings together
Is used as water proofing material
Is used as damp proofing material
Is made from bitumen and hessian fibres
All the above
Igneous rocks
Metamorphic rocks
Sedimentary rocks
Sedimentary metamorphic rocks
Forms carbon dioxide
Carbon dioxide with carbon forms carbon mono-oxide
Carbon mono-oxide reacts with Fe2O3 to form iron and liberates CO2
All the above
Iron
Carbon
Manganese
Sulphur
Metamorphic rock
Argillaceous rock
Calcareous rock
Siliceous rock
Plastics are chemical resistant
Plastics are durable
Plastics are ductile
Plastics are excellent electric insulators
Are of dark brown colour
Produce a metallic sound when struck
Are well burnt
Are under burnt
A process of removing sap
Creosoting
Painting with sodium silicate
Coating with tar
Clay
Feldspar
Quartz
All of these
Fat lime
Rich lime
White lime
None of these
Is obtained by purifying pig iron
Is manufactured in required shapes
May contain 2 to 5 per cent of carbon with other impurities
All the above
Olive oil
Linseed oil
Kerosene oil
Acetate of lead
Polystyrene
Polypropylene
Polyvinylchloride
All of these
Cementation process
Crucible process
Bessemer process
Open hearth process
30 minutes
1 hour
6 hours
10 hours
Clamp
Bull's kiln
Hoffman's kiln
None of these
Dressing
Calcination
Roasting
Smelting
Cast iron
Wrought iron
Steel
All the above
Proportioning of aggregates
Fineness modulus
Grading of aggregates
None of these
Shale
Lime stone
Sand stone
Granite
5 %
15 %
25 %
35 %
Trowel
Square
Bolster
Scutch
Becomes rigid when moulded at suitable pressure and temperature
At 127°C to 177°C permanently set and further application of heat does not soften it
Chars at 343°C
All the above
0.25 %
1.0 %
1.5 %
2 %
Plastics have generally low melting point
The coefficient of thermal expansion of plastics is about three times than that of steel
The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67
All the above
Actinolite asbestos
Amosite asbestos
Anthophylite asbestos
All the above