Hardness test
Workability test
Weight test
Toughness test
C. Weight test
Cavity of a cavity wall should start near ground level
Cavity of a cavity wall should terminate near eaves level of sloping roof
Cavity of a cavity wall should terminate near coping of flat roof with parapet wall
All the above
The first coat of stucco plaster is called scratch coat
The second coat of stucco plaster is called brown coat
The third coat of stucco plaster is called white coat
All the above
Ashlar arch
Rubble arch
Gauged brick arch
Axed brick arch
To drain off the water from the filling
To ventilate the stone masonry
To add architectural beauty
To increase compaction of the earth retained
Header
Stretcher
Closer
None of these
Recessed pointing
Weather pointing
V-pointing
Tuck pointing
1 metre
2 metres
3 metres
4 metres
The pile driven in sand is called sand pile
The drilled hole filled with sand is called sand pile
The sand piles are used for bearing purposes
None of these
A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads
A combined footing may be either rectangular or trapezoidal in shape
Trapezoidal shaped footings may be provided under any loading
All the above
Louver
Stop
Horn
Rebate
Spandril
Haunch
Springing
Soffit
Heart shakes
Cupshakes
Starshakes
Rindgalls
Simplex pile
Franki pile
Pressure pile
Vibro pile
Cement is added to lime mortar to increase its hydraulic properties only
Lime surkhi mortar is used for pointing the walls
Lime should be slaked before preparing lime mortar
High early strength concrete is generally used in cold weather
Dubbing out
Floating
Knitting
Blistering
1 day
4 days
7 days
14 days
Truck pointing
Recessed pointing
Struck pointing
Grooved pointing
To support the common rafter
To support purlins
To prevent the purlins from tilting
All of the above
Dead loads
Live loads
Wind loads
All of these
Header
Stretcher
Closer
None of these
Granite
Marble
Sand stone
Slate
2 metres
2.5 metres
3 metres
None of the above
wh × [(1 - sin φ)/(1 + sin φ)]
(wh/2) × [(1 - sin φ)/(1 + sin φ)]
wh × √[(1 - sin φ)/(1 + sin φ)]
wh × √[(1 + sin φ)/(1 - sin φ)]
Coastal regions
Plain regions
Covering large areas
All of the above
Scaffolding
Dead shore
Raking shore
Under pinning
Lack of ventilation
Alternate wet and dry conditions
Complete submergence in water
None of the above
1 : 1
1 : 2
1 : 3
1 : 4
Rising of water table
Vibrations caused by traffic movements
Mining in the neighbourhood
All the above
25 to 50 mm
25 to 75 mm
75 to 125 mm
50 to 100 mm
350
420
450
500