A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads
A combined footing may be either rectangular or trapezoidal in shape
Trapezoidal shaped footings may be provided under any loading
All the above
D. All the above
Key
Soffit
Springer
Haunch
Simplex pile
Franki pile
Pressure pile
Vibro pile
25 to 50 mm
25 to 75 mm
30 to 125 mm
50 to 100 mm
3 day
7 days
14 days
21 days
A mortar joint having a concave finishing in brick masonry, is called keyed joint
A mortar joint projecting beyond the face of a masonry wall, is called tucked joint
A mortar joint having a recess in it, is called ruled joint
All the above
Balusters
Newel posts
Balustrades
Railings
There is no horizontal tie beam
There is a horizontal tie at the feet of rafters only
There is a horizontal tie at almost the middle of rafters only
There are two horizontal ties, one at the feet and other at the middle of the rafters
Skew back
Soffit
Spandril
Haunch
Heat insulated
Sound insulated
Neither (a) nor (b)
Both (a) and (b)
15 mm
25 mm
35 mm
45 mm
Two directions without break in the slope on each side
Two directions with break in the slope on each side
Four directions without break in the slope on each side
Four directions with break in the slope on each side
Under-ream pile
Friction pile
Bearing pile
Sheet pile
5
4
3
2
Ground water observations are hindered due to entry of the slurry in the soil below the bottom of the hole
Caving or mixing of strata are caused in soft soils or cohesionless soils
The soil to a considerable depth below the bottom of the hole gets disturbed
All the above
Jambs
Posts
Reveals
Styles
Friction pile
Sheet pile
Batter pile
Anchor pile
Queen closer
Bevelled closer
King closer
Half king closer
5 m
10 m
15 m
20 m
Cleat
Stop
Horn
None of these
Random rubble masonry
Coursed rubble masonry
Dry rubble masonry
Ashlar masonry
Friction pile
Bearing pile
Friction bearing pile
Rough pile
350
420
450
500
Inclined borings are made for taking samples under existing structures
Inclined borings are occasionally used instead of vertical holes
The spacing of inclined borings is kept such that one bore hole is vertically above the bottom of an adjacent bore hole
All the above
Heat insulation
Sound insulation
Prevention of dampness
All the above
10
12
15
No limit
Heart shakes
Cupshakes
Starshakes
Rindgalls
Intrados
Rise
Spandril
Extrados
The cost of square rooms is less
The expenditure on the foundation and roof for the double storeyed building is nearly half of that for the ground storeyed building
The cost of construction of a house may be minimised by restricting the height floors
All the above
Louvered door is generally provided in bath rooms
Flush door is generally provided in dining room
Revolving door is generally provided in cinema halls
Sliding door is generally provided in show rooms
10 cm
15 cm
20 cm
25 cm