The tensile strength of the welded joint for double fillet is (where s = Leg or size of the weld, l = Length of weld, and σt = Allowable tensile stress for weld metal)
0.5 s.l.σt
s.l.σt
√2 s.l.σt
2.s.l.σt
Correct Answer :
C. √2 s.l.σt
Related Questions
A bar of copper and steel form a composite system, which is heated to a temperature of 40°C. The stress induced in the copper bar will be
Tensile
Compressive
Shear
Zero
Elasticity of Mild Steel specimen is defined by
Hookes law
Yield point
Plastic flow
Proof stress
A column of length (l) with both ends fixed may be considered as equivalent to a column of length __________ with both ends hinged.
l/8
l/4
l/2
l
The sum of internal energy (U) and the product of pressure and volume (p.v) is known as
Workdone
Entropy
Enthalpy
None of these
The stress at which extension of the material takes place more quickly as compared to the increase in load is called
Elastic point of the material
Plastic point of the material
Breaking point of the material
Yielding point of the material
When a system changes its state from one equilibrium state to another equilibrium state, then the path of successive states through which the system has passed, is known as
Thermodynamic law
Thermodynamic process
Thermodynamic cycle
None of these
Otto cycle is also known as
Constant pressure cycle
Constant volume cycle
Constant temperature cycle
Constant temperature and pressure cycle
The standard value of atmospheric pressure taken at sea level is
1.013 bar
760 mm of Hg
1013 × 102 N/m2
All of these
The ratio of specific heat at constant pressure (cp) and specific heat at constant volume (cv) is
Equal to one
Less than one
Greater than one
None of these
One kg of carbon produces __________ kg of carbon dioxide.
3/7
7/3
11/3
3/11
The work ratio of simple gas turbine cycle depends upon
Maximum cycle temperature
Minimum cycle temperature
Pressure ratio
All of these
The columns whose slenderness ratio is less than 80, are known as
Short columns
Long columns
Weak columns
Medium columns
A path 1-2-3 is given. A system absorbs 100 kJ as heat and does 60 kJ of work while along the path 1-4-3, it does 20 kJ of work. The heat absorbed during the cycle 1-4-3 is 
-140 kJ
-80 kJ
-40 kJ
+60 kJ
Which of the following gas has a minimum molecular mass?
Oxygen
Nitrogen
Hydrogen
Methane
The assumption made in Euler's column theory is that
The failure of column occurs due to buckling alone
The length of column is very large as compared to its cross-sectional dimensions
The column material obeys Hooke's law
All of the above
The ratio of root mean square velocity to average velocity of gas molecules at a particular temperature is
0.086
1.086
1.086
4.086
A cube subjected to three mutually perpendicular stress of equal intensity p expenses a volumetric strain
3p/E × (2/m - 1)
3p/E × (2 - m)
3p/E × (1 - 2/m)
E/3p × (2/m - 1)
Energy can neither be created nor destroyed, but it can be transformed from one form to another. This statement is known as
Zeroth law of thermodynamics
First law of thermodynamics
Second law of thermodynamics
Kinetic theory of gases
The efficiency of Carnot cycle depends upon
Temperature limits
Pressure ratio
Volume compression ratio
Cut-off ratio and compression ratio
Which of the following is the extensive property of a thermodynamic system?
Pressure
Volume
Temperature
Density
Strain is equal to (where l = Original length, and δl = Change in length)
l/δl
δl/l
l.δl
l + δl
The value of one bar (in S. I. units) is equal to
1 × 102 N/m2
1 × 103 N/m2
1 × 104 N/m2
1 × 105 N/m2
Carnot cycle has maximum efficiency for
Petrol engine
Diesel engine
Reversible engine
Irreversible engine
A shaft revolving at ω rad/s transmits torque (T) in Nm. The power developed is
T.ω watts
2π. T.ω watts
2π. T.ω/75 watts
2π. T.ω/4500 watts
The heat and work are mutually convertible. This statement is called __________ law of thermodynamics.
Zeroth
First
Second
Third
One kilowatt is equal to
1 N-m/s
100 N-m
1000 N-m/s
1 × 106 N-m/s
The measurement of a thermodynamic property known as temperature is based on
Zeroth law of thermodynamics
First law of thermodynamics
Second law of thermodynamics
None of these
Which of the following gas is mostly used in town for street and domestic lighting and heating?
Producer gas
Coal gas
Mond gas
Coke oven gas
A key is subjected to side pressure as well at shearing forces. These pressures are called
Bearing stresses
Fatigue stresses
Crushing stresses
Resultant stresses
A vertical column has two moments of inertia (i.e. Ixx and Iyy ). The column will tend to buckle in the direction of the
Axis of load
Perpendicular to the axis of load
Maximum moment of inertia
Minimum moment of inertia