Home
Current Affairs January 2024

What is the correct answer?

4

To cope up high temperature of 196°C, the taxi ways and aprons are constructed with

A. Asphaltic concrete

B. Rubberised tar concrete

C. Plain concrete

D. All the above

Correct Answer :

D. All the above


Related Questions

What is the correct answer?

4

For the proposed runway stated in if the aerodrome reference temperature is 17°.2, the net designed length of the runway is

A. 2716 m

B. 2816 m

C. 2916 m

D. 3016 m

What is the correct answer?

4

For Class A Air port the difference of reduced levels of higher and lower edges of the conical surface, is

A. 25 m

B. 50 m

C. 75 m

D. 100 m

What is the correct answer?

4

Which of the following is an example of failure in flexible pavements?

A. Alligator cracking

B. Mud pumping

C. Warping cracks

D. Shrinkage cracks

What is the correct answer?

4

Assertion A : The ratio of arriving and departing aircrafts influences the airport Capacity: Reason R : Landing operation is generally given priority over the taking off operation. Select your answer based on the coding system given below:

A. Both A and R is true and R is the correct explanation of A

B. Both A and R is true and R is not the correct explanation of A

C. A is true but R is false

D. A is false but R is true

What is the correct answer?

4

According to the International Civil Aviation Organisation (I.C.A.O.) the strength of runway pavements, have been coded by

A. Seven English alphabets

B. Last Seven English alphabets

C. First Seven English alphabets

D. First seven numbers

What is the correct answer?

4

Pick up the correct statement from the following:

A. The speed of the aircraft relative to the ground, is called cruising speed

B. The speed of the aircraft relative to wind, is called air speed

C. When wind is blowing the direction of the flight, air speed is less than cruising speed

D. All the above

What is the correct answer?

4

Pick up the incorrect statement from the following:

A. Channelization of pavement is caused by constant use of tri-cycle gears of aircraft

B. Blast pads are used over cohesionless soils to resist erosion due to tremendous speed of the jet blast

C. Over-run areas of at least 300 m length on either side of the runway are provided

D. None of these

What is the correct answer?

4

Speed of

A. Sound at 0°C is 1190 kmph

B. Sound varies 2.4 kmph per degree centigrade rise in temperature

C. Sound at 0°C is called one Mach

D. All the above

What is the correct answer?

4

Pick up the correct statement from the following:

A. The centre line of the approach area coincides with that of the runway

B. Approach areas are measured in horizontal surfaces

C. Obstruction clearance surface and approach surface are same

D. All the above

What is the correct answer?

4

Pick up the correct statement from the following:

A. Approach zone survey is carried out to determine the elevations of the protruding obstructions above horizontal, conical and transitional surfaces

B. The wind data of an air port is depicted in the form of a chart known as wind rose

C. The landing and takeoff of the air craft is made against the wind direction

D. All the above

What is the correct answer?

4

Runway threshold is indicated by a series of parallel lines starting from a distance of

A. 3 m from runway end

B. 6 m from runway end

C. 10 m from runway end

D. 15 m from runway end

What is the correct answer?

4

For night landing, the thresholds are lighted

A. Green

B. Red

C. White

D. Yellow

What is the correct answer?

4

Assertion A: The width of a taxiway is smaller than the runway width. Reason R: The speed of the aircraft on a taxiway is greater than that on runway. Select your answer based on coding system given below

A. Both A and R is true and R is the correct explanation of A

B. Both A and R is true but R is not the correct explanation of A

C. A is true but R is false

D. A is false but R is true

What is the correct answer?

4

Pick up the incorrect statement from the following:

A. In single engine aeroplanes, the engine is provided in the nose of the aircraft

B. In double engine aeroplanes, one engine on either wing is placed symmetrically

C. In three engine aeroplanes, two engines are placed on both wings and one engine is placed in the tail

D. None of these

What is the correct answer?

4

The slope of the transitional surface for A, B and C type of runway shall be

A. 1 : 5

B. 1 : 7

C. 1 : 10

D. 1 : 12

What is the correct answer?

4

Zero fuel weight of an aircraft is:

A. Equal to empty operating weight

B. Equal to maximum landing weight

C. Less than empty operating weight

D. Equal to sum of empty operating weight and the maximum pay load

What is the correct answer?

4

The height of the pilot's eye above the runway surface is assumed

A. 1 m

B. 3 m

C. 4 m

D. 5 m

What is the correct answer?

4

The maximum length and pavement strength of the runway is that of

A. A 1

B. B 2

C. B 3

D. G 7

What is the correct answer?

4

The length of clear zone for none instrument runway of a small aircraft is

A. 150 m

B. 300 m

C. 600 m

D. 750 m

What is the correct answer?

4

The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.

A. 0.10 %

B. 0.26 %

C. 0.43 %

D. 0.65 %

What is the correct answer?

4

Pick up the correct statement from the following:

A. Landing speed is directly proportional to the wing loading

B. Wing loading remaining constant, the take off distance is directly proportional to the powder loading

C. Neither (a) nor (b)

D. Both (a) and (b)

What is the correct answer?

4

If the width of the approach area near the runway end is 150 m, the width of the approach area at a distance of 3 kilometres from runway end will be

A. 1500 m

B. 1200 m

C. 1000 m

D. 800 m

What is the correct answer?

4

According to the International Civil Aviation Organisation (I.C.A.O.), the runway lengths of aerodromes, have been coded by

A. Seven English alphabets

B. Last Seven English alphabets

C. First Seven English alphabets

D. First seven natural numbers

What is the correct answer?

4

The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is

A. 2500 m

B. 3725 m

C. 3000 m

D. 3250 m

What is the correct answer?

4

Pick up the correct statement from the following:

A. Minimum turning radius of aircrafts decides the size of the apron and the radius of the curves at taxi-ends

B. Take off and landing distances for an aircraft, determine the minimum runway length

C. The length of the normal haul of the air craft decides the frequency of operation

D. All the above

What is the correct answer?

4

Consider the following statements regarding ICAO recommendation for correction to basic runway length
1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level.
2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation.
3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient. Of these statements

A. 1 and 2 are correct

B. 2 and 3 are correct

C. 1 and 3 are correct

D. 1, 2 and 3 are correct

What is the correct answer?

4

International Civil Aviation Organisation (I.C.A.O.) was set up at Montreal (Canada), in

A. 1929

B. 1939

C. 1947

D. 1950

What is the correct answer?

4

The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is

A. 3070 m

B. 3060 m

C. 3075 m

D. 3015 m

What is the correct answer?

4

The best direction of a runway is along the direction of

A. Longest line on wind rose diagram

B. Shortest line on the wind rose diagram

C. Line clear of wind rose diagram

D. None of these

What is the correct answer?

4

The thickness design of the pavement, is decided on the load carried by

A. Main gears

B. Nose wheel

C. Tail wheel

D. All the above