Related Questions
What is the correct answer?
4
The minimum and the maximum number of members required to form a Private Limited Joint Stock Company are respectively
What is the correct answer?
4
The substance used as a smoke screen in warfare is
What is the correct answer?
4
In the formation of cermets, the ratio of ceramic material to metallic material is usually 80:20. Which of the following is a cermet?
What is the correct answer?
4
Runge-Kutta method is used to solve a/an
A. Ordinary differential equation of nth order
B. Simultaneous non-linear equation
C. Linear differential equation
What is the correct answer?
4
Out of the following, maximum temperature drop for a given heat flow & for the same thickness will be in the case of
What is the correct answer?
4
The thermodynamic law, = constant, is not followed by the
A. Free expansion of an ideal gas
B. Adiabatic expansion of steam in turbine
C. Adiabatic compression of air
D. Ideal compression of air
What is the correct answer?
4
A gas which is collected over water becomes moistened due to water vapor, exerts its own partial pressure at the gas temperature, which is termed as its
What is the correct answer?
4
Which of the following materials does not form adherent oxide film on surface?
What is the correct answer?
4
Presence of nickel & chromium in steel does not raise its
What is the correct answer?
4
Which of the following are considered applications of ultrasonic testing?
A. Determination of elastic constant
B. Detection of defects in metal
C. Measurement of material thickness
What is the correct answer?
4
With increase in steam pressure, its specific volume decreases
A. Rapidly first and then slowly
C. Slowly first and then rapidly
What is the correct answer?
4
One of the methods of purification of leach liquor is ion exchange, which involves
A. Exchange between two liquid phases
B. Exchange between a gaseous phase and a liquid phase
C. Exchange between a liquid phase and an organic resin phase
D. Exchange between a solid phase and a gas phase
What is the correct answer?
4
Propulsion of rocket follows from the
A. Newton's second law of motion
B. Newton's third law of motion
What is the correct answer?
4
The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation of __________ mm.
What is the correct answer?
4
The co-ordination number in simple cubic structure is
What is the correct answer?
4
For preparation of porous bearings by powder metallurgy, preferred particle shape is
What is the correct answer?
4
Identify the correct statement.
A. Sphlerite is zinc oxide
B. The first law of the thermodynamics is stated as δE = δQ - δW
C. Lead can be produced in a blast furnace
D. T. ferrooxidans is a fungus that can be used for leaching chalcopyrite
What is the correct answer?
4
Work done by a/an __________ process is determined by ∫p. dv
What is the correct answer?
4
Encyclopaedia of Chemical Technology has been
A. Authored by Kirk Othmer
B. Edited by Perry and Chilton
D. Authored by Perry and Chilton
What is the correct answer?
4
The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the
A. Water alkalinity & leakage
B. Hydrazine addition during feed water treatment
C. Release of non-condensable gas from water in the boiler
What is the correct answer?
4
Ferromagnetic materials owe their properties to __________ inner sub-shells.
What is the correct answer?
4
With increase in temperature, the electrical conductivity of semiconductors
D. Either (A) or (B), depends on the type of semi-conductor
What is the correct answer?
4
Fahrenheit and Centigrade scales have the same readings at
What is the correct answer?
4
Steam condenser tubes are made of admiralty brass, in which percentage of zinc & copper are __________ respectively.
What is the correct answer?
4
What happens, when SO2 is passed through a solution of H2S in water?
A. Precipitation of sulphur takes place
What is the correct answer?
4
Regeneration of molecular sieve requires it to be heated to a temperature of about __________ °C.
What is the correct answer?
4
Which of the following is used to produce draught in the locomotive boilers?
What is the correct answer?
4
Metallic surveying tapes are made of __________ which has a low co-efficient of expansion & enough strength.
What is the correct answer?
4
Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process?
What is the correct answer?
4
Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that
A. Pure oxygen has been used for combustion
B. Nitrogen percentage in the fuel is very high
C. Excess air has been used for combustion
D. Hydrogen is not present in the fuel