Related Questions
What is the correct answer?
4
The columns of multi-storeyed buildings are designed to withstand the forces due to
What is the correct answer?
4
The size of a floor tile commonly used, is
A. 15 cm × 15 cm × 1.8 cm
C. 22.5 × 22.5 cm × 2.2 cm
What is the correct answer?
4
The highest line of sloping roof, where two opposite slopes meet, is known as
What is the correct answer?
4
In ordinary residential and public buildings, the damp proof course is generally provided at
D. Midway ground level and water-table level
What is the correct answer?
4
The additional piles which are driven to increase the capacity of supporting loads on vertical piles, are known
What is the correct answer?
4
The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to
What is the correct answer?
4
In soft clay of low bearing capacity, the type of steel pile generally used, is
What is the correct answer?
4
The form Work including the props can be removed from beams, only after
What is the correct answer?
4
The radial splits which are wider on the outside of the log and narrower towards the pith are known as
What is the correct answer?
4
Which of the following metal sheets is most effective in preventing dampness?
What is the correct answer?
4
Pick up the correct statement from the following:
A. English bond is used for brick masonry to support heavy loads
B. Double-Flemish bond is suitable for brick masonry to give uniform face appearance
C. The stretcher bond is used for the construction of half brick masonry brick
What is the correct answer?
4
In jack arch floor, the rise is kept
What is the correct answer?
4
Couple close roof is suitable for maximum span of
What is the correct answer?
4
The line of intersection of the surfaces of a sloping roof forming an external angle exceeding 180°, is
What is the correct answer?
4
In horizontal D.P.C, thickness of cement concrete (1 : 2 : 4) is
What is the correct answer?
4
A covering of concrete placed on the exposed top of an external wall, is known as
What is the correct answer?
4
The window which projects outside a room of a building for admitting more light and air, is known
What is the correct answer?
4
In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used
What is the correct answer?
4
The type of pointing in which upper side of mortar joints is kept about 12 mm inside the face of the masonry and bottom is kept flushed with face of wall, is
What is the correct answer?
4
The foundations are placed below ground level, to increase
C. Stability of structure
What is the correct answer?
4
The type of bond in which every course contains both headers and stretchers, is called
What is the correct answer?
4
The alignment of a cross joint along the plumb line is
What is the correct answer?
4
A projecting piece usually provided to support a truss, is
What is the correct answer?
4
Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is,
C. Q = (W × 6)/h (S + 2.5)
D. Q = (W × 2.5)/6 (S + h)
What is the correct answer?
4
Which one of the following factors is considered for the orientation of buildings?
A. The direction of the prevailing winds in the area
B. The exposure of the walls and roof of the buildings to the rays of sun
C. The extent up to which the sunrays penetrate with the verandah
What is the correct answer?
4
You are asked to design and supervise a truss for a factory to have spans 6 m to 9 m. The type of the truss you will use, is
What is the correct answer?
4
The type of joint commonly used at the junction of a principal rafter and tie beam in timber trusses is
A. Mortise and tenon joint
B. Oblique mortise and tenon joint
What is the correct answer?
4
To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as
What is the correct answer?
4
The sound which continues even after its source is cut off, is called
What is the correct answer?
4
Pick up the correct statement from the following:
A. Cavity of a cavity wall should start near ground level
B. Cavity of a cavity wall should terminate near eaves level of sloping roof
C. Cavity of a cavity wall should terminate near coping of flat roof with parapet wall