Pick up the consideration to the taken while designing a hospital from the following:
The operation theatre unit to be detached as it requires sterilized zone but near the ward for the patients and doctor
The mortuary should be detached from the main circulation with a post-mortem room
Casualty unit should be provided a separate entrance
All the above
Correct Answer :
D. All the above
Related Questions
The vertical distance between the springing line and highest point of the inner curve of an arch is known as
Intrados
Rise
Spandril
Extrados
The depth of an arch is the distance between
Ground level and springing line
Crown and springing line
Crown and ground level
Intrados and extrados
The least bearing capacity of soil is that of
Hard rock
Moist clay
Soft rock
Coarse sandy soil
The window which is provided in flat roof of a room, is known
Dormer window
Lantern window
Louvered window
Sky window
Slate
Is a metamorphic rock
Splits into thin sheets along its bedding planes
Has a smooth surface and contains alumina and silica
Possesses good water absorption capacity
A concrete structure is set on fire and the temperature raises to 1000°C. The strength of concrete as compared to original strength reduces to
10 %
15 %
20 %
25 %
Cavity wall is generally provided for
Heat insulation
Sound insulation
Prevention of dampness
All the above
Cast iron piles
Are suitable for works under sea water
Resist shocks or vibrations
Are suitable for use as batter piles
Are useful for heavy vertical loads
Exposed portions of vertical surface at right angles to the door or window frame, are known as
Jambs
Lintels
Reveals
Soffits
The voussoir placed at crown of an arch, is known as a
Key
Soffit
Springer
Haunch
In the construction of arches, sand box method is used for
Centring
Actual laying of arch work
Striking of centring
None of the above
Pile foundation is generally provided if soil is
Compressible
Water logged
Made up
All the above
The entrained concrete is used in lining walls and roofs for making
Heat insulated
Sound insulated
Neither (a) nor (b)
Both (a) and (b)
The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as
Trowelling
Laying
Grouting
Placing
The maximum permissible deflection of a timber beam supporting a roof, is
L/100
L/150
L/260
L/360
Open test pit is only suitable upto a depth of
2 metres
2.5 metres
3 metres
None of the above
The arrangement of supporting an existing structure by providing supports underneath, is known as
Shoring
Underpinning
Jacking
Piling
As compared to English bond, double Flemish bond is
Stronger
More compact
Costly
None of the above
The type of pile which is driven at an inclination to resist inclined forces is known as
Friction pile
Sheet pile
Batter pile
Anchor pile
The maximum total settlement for isolated foundations on clayey soils should be limited to
25 mm
40 mm
65 mm
100 mm
The process of working a flat for the finishing coat, is known
Dubbing out
Floating
Knitting
Blistering
The Auger borings are not common
In soils that require lateral support
In cohesive soils
In soft soils
None of the above
In ordinary residential and public buildings, the damp proof course is generally provided at
Ground level
Plinth level
Water table level
Midway ground level and water-table level
The member which is placed horizontally to support common rafter of a sloping roof, is
Purlin
Cleat
Batten
Strut
Couple close roof is suitable for maximum span of
2.5 m
3.5 m
4.5 m
5.5 m
The range of spread from the wall base to outer edge of a brick work foundation does not exceed
1/2 horizontal to 1 vertical
2/3 horizontal to 1 vertical
1 horizontal to 1 vertical
2 horizontals to 1 vertical
The type of bond in which every course contains both headers and stretchers, is called
English bond
Flemish bond
Russian band
Mixed bond
The type of footing which is used to transmit heavy loads through steel columns is
Raft foundation
Grillage foundation
Well foundation
Isolated footing
Brick nogging type of partition wall, is constructed by
Laying bricks as stretchers in cement mortar
Laying bricks as headers in cement mortar
Reinforcing brick wall with iron straps
Constructing brick work within a wooden framework
A projecting piece usually provided to support a truss, is
Cornice
Coping
Frieze
Lintel