Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation

A. Pressure falls below the vapour pressure

B. Pressure becomes very high

C. Temperature becomes low

D. All 'a', 'b' & 'c'

Related Questions

  1. Steel balls are manufactured by
  2. There are one octahedral void and __________ tetrahedral void in the closest packing of atoms.
  3. The refractory brick which has good thermal shock resistance at high temperature but cracks on cooling…
  4. Galvanic corrosion cannot be prevented by
  5. Babbitt lining is used on brass/bronze bearings to increase the
  6. Carbon is present in the form of __________ in grey cast iron.
  7. Spheroidising of a material is a/an __________ process.
  8. Which of the following varies as the square root of oil pressure during atomisation of fuel oil through…
  9. Which of the following fastening devices has a head at one end and a nut fitted to the other?
  10. In condensers used in thermal power plants, steam is normally used in shell side and cooling water on…
  11. The function of neutral flux used in the pyrometallurgy of metal extraction is to increase the __________…
  12. Cobalt - 60 is used as a source of __________ in medical therapy & industrial radiography.
  13. Addition of __________ to steel does not help in improving its machinability.
  14. Lap joints are preferred over butt joints in soldering/brazing, because these joints are
  15. Increasing sulphur content in pig iron tends to make it
  16. Stainless steel is welded using
  17. The dimensional formula of bulk modulus of elasticity is same as that of the
  18. A jig is used while __________ a hole.
  19. Dryness fraction of dry steam is
  20. Nickel is a __________ material.
  21. The maximum thickness of the metal which can be welded using ultrasonic welding is __________ mm.
  22. Silicon crystal can be converted to p-type semiconductor by doping with
  23. Wohler test is a destructive test to find out the __________ strength of a prepared metal specimen.
  24. The difference in one unit of Rockwell hardness number corresponds to a difference in the depth of indentation…
  25. The taper provided on pattern for its easy & clean withdrawal from the mould is termed as the __________…
  26. Closeness of packing is maximum in case of __________ crystal lattice.
  27. Electrostatic separation of minerals from each other is based on their differences in the following…
  28. Photographic plates are coated with
  29. __________ are normally subjected to sub-zero treatment.
  30. Coating thickness in case of galvanising of steel sheet generally corresponds to the deposition of __________…

Please do not use chat terms. Example: avoid using "grt" instead of "great".