Front seats
Shoulder anchors
Seat belt retractors
Seat belt buckles
C. Seat belt retractors
Power
Fuel consumption
Engine r.p.m.
Distance
Shock absorber
Torsion bar
Spring
Radius rod
6-10
10-1
15-25
25-40
Prevent the combustion gases from leaking from the joint between the cylinder block and the cylinder head
Prevent engine oil from going into combustion chamber
Removes impurities from cylinder head lubricating oil
None of the above
Spill cut-off
Delay period
Injection period
Ignition period
Cast iron and steel
Cast iron and aluminium alloy
Steel and aluminium alloy
Brass and steel
Spark plug gap too small
Spark plug gap too wide
Vapours lock in the fuel only
Incorrect fuel air mixture
Flat, radial, and V
In a row, in line, and opposed
In line, V, and opposed
V, double row, and opposed
Bead
Side wall
Shoulder
Tread
45°
60°
90°
130°
I.P/B.P.
B.P/I.P.
B.P/F.P.
F.P/B.P.
SAE 30
API SF
SAE 20 W50
API 50
The drive shafts are splined to the differential carrier.
The left side gear and the differential carrier rotate in constant unison.
The differential carrier houses differential pinion gears and side gears; each pinion gear meshes with a different side gear.
The differential carrier houses differential pinion gears and side gears
Spark ignition (S.I.) engines
Compression ignition (C.I.) engines
Steam engines
None of these
Vehicle speed
Torsional vibrations
Jerky starts
None of these
Cylinder head
Crankshaft
Cylinder block
Oil pan
1-2-3-4
1-3-4-2
1-2-4-3
1-3-2-4
Grip the road and provide good traction
Substitute for springs
Act as brake
None of these
Immediately after the ignition switch is turned off
While the engine is running
A few minutes after the ignition switch is turned off
While the engine is running at high idle speed
Ensure that equal pressure is supplied to the front and rear brakes throughout every braking operation
Reduce the brake fluid pressure when the brakes approach their lockup point
Cause less brake fluid pressure to act on the front brakes than on the rear brakes when the fluid pressure exceeds a predetermined level
Cause less brake fluid pressure to act on the rear brakes than on the front brakes when the fluid pressure exceeds a predetermined level.
R
2 R
4R
4 R²
Pistons
Rocker arms
Camshaft pulley
Valve stems
Smaller than the positive terminal post
Larger than the positive terminal post
Of the same size as the positive terminal post
None of these
Insufficient air during combustion
Insufficient fuel during combustion
Low temperature combustion
High temperature combustion
Volts
Amperes
Weight
Ampere hours
Increase
Decrease
Remain constant
Be doubled
Lead peroxide (PbO₂)
Spongy lead (Pb)
Lead sulphate (PbSO₄)
Sulphuric acid (H₂SO₄)
Steel
Copper
Zinc
Aluminium
To turn the flywheel
To drive the drive plate
To drive the fuel pump
To transmit motion of the piston to the crankshaft
Lubricates the cylinder wall by releasing oil from its hole
Keeps the cylinder wall lubricated by holding oil in its channel
Prevents engine oil from going into the combustion chamber and returns excess lubricating oil off the cylinder wall through the return holes in the piston to the oil pan
Maintains a seal and prevents escape of burned gases and oil leakage