Home

Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.

A. O Snaps

B. Ortho

C. Grid

D. Dynamic Input

Related Questions

  1. In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in…
  2. This means that a feature of a finished product contains the maximum amount of material permitted by…
  3. Several of the tools used in traditional drafting include the following:
  4. When drawing a line using the relative coordinate system a line is created from ________.
  5. When dimensioning piping drawings, you give the lengths of all runs of this type:
  6. This type of surface is tipped to all principal planes of projection and does not appear true size in…
  7. The architectural and construction industries use the United States National CAD standard (NCS) system…
  8. When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection,…
  9. A fillet is a rounded surface on the ________ corner of a part.
  10. This process recognizes the inherent interrelationships between design and manufacturing:
  11. Generally, the units used on an architectural drawing are set to ________.
  12. This is used in drawings to represent the edge of a solid object:
  13. When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
  14. Most architectural firms and mechanical design companies utilize different categories of blocks. These…
  15. This type of circuit is a semiconductor wafer or chip:
  16. This is a common method for connecting steel members of buildings and bridges:
  17. In this type of projection, each of the axes has different ratios of foreshortening:
  18. 3.When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension…
  19. Oblique drawings are dimensioned in a similar fashion as these types of drawings:
  20. This is the bottom surface joining the sides of two adjacent threads:
  21. In oblique sketches, the most commonly used angles for receding lines are:
  22. If a designer is developing a plan for a project in which the entire part is made out of ¾ thick…
  23. This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal…
  24. This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic…
  25. The site plan illustrates ________.
  26. Auto-CAD refers to isometric ellipses as ________.
  27. In the section view, the areas that would have been in actual contact with the cutting plane are shown…
  28. In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate…
  29. Elevation drawings will include information about ________.
  30. This is an angled surface used on cylinders to make them easier to handle:

Please do not use chat terms. Example: avoid using "grt" instead of "great".