Most architectural drawings produced for field use by building contractors are printed on architectural D size paper which measures ________.

A. 24 × 36

B. 18 × 24

C. 11 × 17

D. 34 × 22

Please do not use chat terms. Example: avoid using "grt" instead of "great".

You can do it
  1. A full scale technical drawing will have a scale factor of ________.
  2. The second line of dimensions out from the plan generally includes ________.
  3. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
  4. This type of thread is a thread on the inside of a member:
  5. These units are based on inch-foot and yard measurements:
  6. This type of drawing shows two lines representing the pipe diameter:
  7. An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________.
  8. Baseline dimensions are referenced from a common geometric feature known as a ________.
  9. When lettering a CAD drawing, for clarity you should limit the number of fonts to:
  10. This is the measured size of a finished part:
  11. A civil engineer working on a bridge design would probably rely on his ________ scale for checking printed…
  12. In order to set drawing limits for a C size architectural drawing the drafter should set the limits…
  13. This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:
  14. These maps are used to plan construction projects that locate construction features so they fit the…
  15. In oblique sketches, the most commonly used angles for receding lines are:
  16. This type of surface is tipped to all principal planes of projection and does not appear true size in…
  17. The type of line that projects from an object for the express purpose of locating a dimension is a ________…
  18. The first step in creating a traditional technical drawing is to ________.
  19. Students can complete an associate's degree in drafting which normally takes about ________ years to…
  20. The text height for room names should be set to ________for a drawing that will be plotted to a scale…
  21. The daily workload of a ________ drafter would generally include technical drawings of machine parts.
  22. In this type of projection, each of the axes has different ratios of foreshortening:
  23. In an oblique drawing, equally spaced partial circles may be used to show this:
  24. Angles project true size only when the plane containing the angle and plane of projection are this:
  25. Newer versions of Auto-CAD utilize the ________ to make block library management very easy.
  26. Architectural dimensioning is usually done in ________.
  27. Elevation drawings will include information about ________.
  28. This type of drawing is created to calculate areas, locate property lines, and locate building projects…
  29. These gears transmit power between shafts whose axes intersect at any angle:
  30. Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These…