PDM is the acronym for:

A. Project drawing management

B. Product drawing manipulation

C. Product data management

D. Project data manipulation

Related Questions

  1. These are special installations of stone or concrete marking the locations of points accurately determined…
  2. When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
  3. Perspective drawings are classified according to their number of these features:
  4. Some common blocks used by architectural drafters include ________.
  5. The ________ dimension tool will place the length of an angled line.
  6. EDM is the acronym for:
  7. A round is a rounded surface on the ________ corner of a part.
  8. If a plane is parallel to the plane of projection, it appears:
  9. Objects that are symmetric can be shown effectively using this type of section:
  10. Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views…
  11. The most common geometric form used in gears today is this:
  12. The title block used on working drawings should include the __________.
  13. The offset distance for the width (front to back) distance of the auxiliary view is the same distance…
  14. Schematic and single-line diagrams should be arranged so that signal or transmission path from input…
  15. The foundation contractor will work with the following architectural plans.
  16. When creating a block the drafter needs to pay particular attention to selecting a base point because…
  17. When using versions of Auto-CAD prior to Release 2006 it may be necessary to ________ a block in order…
  18. Lines of an isometric drawing that are not parallel to the isometric axes are called this:
  19. These are used to attach parts to a cylinder so they won't turn on it:
  20. The dimension text size is determined by what the architect deems necessary in __________.
  21. The text used on a typical detail sheet should be ________.
  22. The ________ is a standard element of a section view in a technical drawing.
  23. An architect often relies on a ________ to complete the set of technical drawings used in the design…
  24. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point…
  25. These weld symbols have no arrow-side or other-side significance:
  26. This is the intersection of the ground plane with the picture plane:
  27. This allows the designer to conceptualize objects more easily without having to make costly illustrations,…
  28. In this type of section, one quarter of the object is removed:
  29. This is the smallest diameter of a screw thread:
  30. Elevation drawings will include information about ________.

Please do not use chat terms. Example: avoid using "grt" instead of "great".