Preliminary project report for a road project must contain
The detailed estimated cost based on detailed design
The several alternatives of the project that have been considered
The soil survey, traffic survey, concept design and approximate cost
The contract documents for inviting tenders
Correct Answer :
C. The soil survey, traffic survey, concept design and approximate cost
Related Questions
Free float is mainly used to
Identify the activities which can be delayed without affecting the total float of preceding activity
Identify the activities, which can be delayed without affecting the total float of succeeding activity
Establish priorities
Identify the activities which can be delayed without affecting the total float of either the preceding or succeeding activities
Final technical authority of a project lies with
Assistant Engineer
Executive Engineer
Superintending Engineer
Chief Engineer
The estimated time required to perform an activity, is known as
Event
Dummy
Duration
Float
The technique for establishing and maintaining priorities among the various jobs of a project, is known
Event flow scheduling technique
Critical ratio scheduling
Slotting technique for scheduling
Short interval scheduling
A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is
10000 kg
12500 kg
22500 kg
5000 kg
Consider the following activities in a building construction:
1. Concreting of roof slabs
2. Brick-jelly lime concrete terracing
3. Erection of form work for slab
4. Construction of parapet wall in terrace
The correct sequence of these activities is
1, 3, 2, 4
3, 1, 4, 2
3, 1, 2, 4
1, 3, 4, 2
In PERT analysis, the time estimates of activities and probability of their occurrence follow
Normal distribution curve
Poisson's distribution curve
Beta distribution curve
None of the above
Consider the following features/factors:
1. Projects are of the non-repetitive type
2. Time required need not be known
3. Time required is known precisely
4. Events have been established for planning
5. Emphasis is given to activities of project PERT is preferred for planning because of
1, 2 and 4
3, 4 and 5
1, 3 and 4
1, 2 and 5
Works costing less than Rs. 20,000 are treated as
Any project
Major projects
Minor projects
All the above
The performance of a specific task in CPM, is known
Dummy
Event
Activity
Contract
Select the correct statement.
Activity arrows in a CPM network are drawn to scale
The tail of an arrow represents the finish of an activity
Arrow bead represents the start of an activity
None of the above
Various activities of a project, are shown on bar charts by
Vertical lines
Horizontal lines
Dots
Crosses
The independent float affects only
Preceding activities
Succeeding activities
The particular activity involved
None of the above
Which of the following is a weakness of bar chart?
Interdependencies of activities
Project progress
Uncertainties
All of the above
In India, are prefabricated components costlier than those of traditional cast-in-situ items that the prefabricated components replace?
Yes, because of heavier overheads and handling cost
Yes, because of the very high order of quality control for the factory made components
No, because of repetitive manufacture of a number of elements
No, because of savings in site labour
A tractor shovel has a purchase price of Rs. 4.7 lacs and could save the organization an amount of rupees one lac per year on operating costs. The salvage value after the amortization period is 10% of the purchase price. The capital recovery period will be
3.7 years
4.23 years
5 years
7.87 years
Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors?
Ice
Concrete
Loose sand
Earth
If a is the optimistic time, b is the pessimistic time and m is most likely time of an activity, the expected time of the activity, is
(a + m + b)/6
(a + 2m + b)/6
(a + 4m + b)/6
(a + 5m + b)/6
Which of the following does not represent an activity?
Site located
Foundation is being dug
The office area is being cleaned
The invitations are being sent
Critical Path Net Work helps an engineer
To concentrate his attention on critical activities
To divert the resources from non-critical advanced activities to critical activities
To be cautious for avoiding any delay in the critical activities to avoid delay of the whole project
All the above
Which of the following is not a PERT event?
Site investigation started
Sessional work completed
Bus starts from Jaipur
Class is being attended
Free float for any activity is defined as the difference between
Its earliest finish time and earliest start time for its successor activity
Its latest start time and earliest start time
Its latest finish time and earliest start time for its successor activity
Its earliest finish time and latest start time for its successor activity
A machine costs Rs. 20000 and its useful life is 8 years. The money is borrowed at 8% interest per annum. The capital recovery factor at 8% interest per annum for 8 years is 0.174. The annual equipment cost of the machine will be
Rs. 1740
Rs. 3480
Rs. 5220
Rs. 6960
During the construction period, price variation clause in contracts caters to
Increase in rates of only important materials
Variation in cost in materials element, labour element and petrol-oillubricant element
Variation in total cost of the project on an ad hoc basis
Rate of inflation
If the scheduled completion time of a project is more than the earliest expected time for completion of the project, then the probability of completion of the project within the scheduled completion time will be
50 %
Less than 50 %
More than 50 %
100 %
Consider the following statements for a power shovel: (i) Output can be increased by reducing the angle of swing for a given depth of cut. (ii) For a given angle of swing, output will be maximum at optimum depth of cut. (iii) Output can be increased by keeping the depth of cut less than optimum depth, (iv) Output can be increased by increasing the size of shovel. Of these statements
(ii), (iii) and (iv) are correct
(i), (ii) and (iv) are correct
(i), (iii) and (iv) are correct
(i) and (iv) are correct
The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawler-mounted and pneumatic tyre-mounted machines would be respectively
80 and 90
90 and 80
85 and 75
75 and 83
A contractor has two options;
(I): Invest his money in project A or
(II): Invest his money in project B.
If he decides to invest in A, for every rupee invested, he is assured of doubling his money in ten years. If he decides to invest in B, he is assured of making his money 1.5 times in 5 years. If the contractor values his money at 10% interest rate, he
Should invest in neither of the two projects
Could invest in either of the two projects
Should invest in project A
Should invest in project B
Modular co-ordination of construction means proper
Planning
Designing
Execution
All the above
Grader is used mainly for
Trimming and finishing
Shaping and trimming
Finishing and shaping
Finishing, shaping and trimming