50 : 50
40 : 60
60 : 40
20 : 80
C. 60 : 40
Silicon
Sulphur
Manganese
Phosphorus
It is prone to age hardening
It can be forged
It has good machining properties
It is lighter than pure aluminium
Carbon in the form of carbide
Low tensile strength
High compressive strength
All of these
In which atoms align themselves in a geometric pattern upon solidification
In which there is no definite atomic structure and atoms exist in a random pattern just as in a liquid
Which is not attacked by phosphorous
Which emits fumes on melting
Babbitt metal
Monel metal
Nichrome
Phosphor bronze
Does not effect
Lowers
Raises
None of these
1539°C
1601°C
1489°C
1712°C
Nickel
Chromium
Tungsten
Vanadium
Chromium
Nickel
Vanadium
Manganese
Same
Less
More
None of these
High tensile strength
Its elastic limit close to the ultimate breaking strength
High ductility
All of the above
Acidic
Basic
Neutral
Brittle
At which crystals first start forming from molten metal when it is cooled
At which new spherical crystals first begin to form from the old deformed one when a strained metal is heated
At which change of allotropic form takes place
At which crystals grow bigger in size
Heated below the lower critical temperature and then cooled slowly
Heated up to the lower critical temperature and then cooled in still air
Heated slightly above the lower critical temperature and then cooled slowly to a temperature of 600°C
None of the above
Body centered cubic
Face centred cubic
Hexagonal close packed
Cubic structure
Silica bricks
A mixture of tar and burnt dolomite bricks
Both (A) and (B)
None of these
Austenite
Pearlite
Ferrite
Cementite
Nickel, copper and iron
Nickel, copper and zinc
Copper, nickel and antimony
Iron, zinc and bismuth
Mica
Silver
Lead
Glass
Face centred cubic lattice
Body centred cubic lattice
Hexagonal close packed lattice
All of the above
Stack
Throat
Bosh
Tyres
Cold rolled into sheets
Drawn into wires
Formed into tube
Any one of these
Adding carbon up to 2.8%
Adding carbon up to 6.3%
Adding carbon up to 0.83%
Adding small quantities of copper
Nickel
Chromium
Nickel and chromium
Sulphur, lead and phosphorus
Are used where ease in machining is the criterion
Contain carbon in free form
Require least cutting force
Do not exist
α-iron
β-iron
γ-iron
δ-iron
Sulphur
Phosphorus
Manganese
Silicon
13% carbon and 87% ferrite
13% cementite and 87% ferrite
13% ferrite and 87% cementite
6.67% carbon and 93.33% iron
3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium
3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium
4 to 4.5% magnesium, 3 to 4% copper and rest aluminium
5 to 6% tin, 2 to 3% copper and rest aluminium
RC 65
RC 48
RC 57
RC 80