These drawings are given to contractors to perform work or manufacture individual parts:
Assembly details
3D drawings
Working drawings
Skeleton assemblies
Correct Answer :
C. Working drawings
Related Questions
This is a systematic approach that integrates the design and manufacture of products with the goal of optimizing the process:
Traditional engineering design
The manufacturing process
Concurrent design
Design for recycling
This type of drawing shows two lines representing the pipe diameter:
Single-line
Double-line
Standard piping
Centerline piping
In this type of view, the cutting plane line indicates both the location of the cutting plane and the direction of sight:
Removed section
Revolved section
Auxiliary section
Partial section
Baseline dimensions are referenced from a common geometric feature known as a ________.
Edge
Corner
Datum
Point of reference
This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
Maximum material condition
Machined material condition
Maximum machined indication
Machine mark indication
These are accurately drawn maps of cities and towns showing property lines and other features that control property ownership:
Monument maps
Cadastral maps
City maps
Topographic maps
Most architectural drawings produced for field use by building contractors are printed on architectural D size paper which measures ________.
24 × 36
18 × 24
11 × 17
34 × 22
In this type of projection, each of the axes has different ratios of foreshortening:
Isometric
Dimetric
Trimetric
Parallel
Perspective drawings are classified according to their number of these features:
Station points
Picture planes
Vanishing points
Ground lines
Approximately this much of the cost of product development and manufacture is determined at the design stage:
40-50 %
60-75 %
70-80 %
75-85 %
This is the theoretically exact size from which limits of size are determined:
Actual Size
Dimensioned size
Production size
Basic size
This practice considers an individual part's dimensions and tolerances and that part's relation to its related parts:
Applying allowances
Geometric dimensioning and tolerancing
Creating datum references
Angular dimensioning tolerances
Some of the common terms used to describe technical drawing include:
Drafting
Engineering Graphics
Engineering Drawing
All of the above
This is an angled surface used on cylinders to make them easier to handle:
Fillet
Taper
Chamfer
Lug
The title block used on working drawings should include the __________.
Sheet number
Line type
Layer set
All of the above
One critical issue drafters need to pay close attention to is the ________.
Size of the sheet
Designer's intent
Scale factor
None of the above
Understanding the Cartesian coordinate system will help the beginning drafter ________.
Control the accuracy of the drawing
Produce a visible grid system
Select a different text style
Choose various line types
In oblique projection, important shapes should be in this position relative to the viewing plane:
Parallel
Perpendicular
Adjacent
Rotated
9.The lines used to create the auxiliary view should appear as ________ in the finished view.
Object lines
Construction lines
Reference lines
Construction lines
The building construction industry relies on sets of ________ drawings to construct homes and commercial buildings.
Mechanical
Isometric
Architectural working
All of the above
Oblique drawings are dimensioned in a similar fashion as these types of drawings:
Orthographic
Isometric
Angular
Parallel
In this type of section, one quarter of the object is removed:
Revolved section
Removed section
Quarter section
Half section
The top, front, and bottom views align in this manner:
Horizontally
Vertically
According to the planar views
Parallel to the frontal plane
On typical electronic diagrams, these items need not be shown unless they are needed for clarification:
Transmission diagrams
Operating relays
Closed relays
Terminal circles
An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
Planar
Horizontal
Auxiliary
Orthographic
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
Primary
Secondary
Revolved
Successive
When lettering a CAD drawing, for clarity you should limit the number of fonts to:
One
Two
Three
Any number
An oil refinery relies on which type of drafter to maintain and update the technical piping drawings used for the construction and maintenance of the facility.
Architectural
Civil
Process piping
Electrical
This type of section is not in direct projection from the view containing the cutting plane:
Revolved section
Removed section
Broken-out section
Full section
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Type @3<45 and enter
Type 3 back slash and enter
Type 3 forward slash and enter
Type 3 and try to use the Dynamic Input readout to find the end point