Home

You are given the following addressing information: 10.0.8.0/22. What type of address is this?

A. Network

B. Directed Broadcast

C. Host

You can do it
  1. What would you use to prevent a packet from traveling around a routing loop forever?
  2. Choose the following that a standard IP ACL can match on.
  3. When using the show interfaces command, which Frame Relay information can you not see?
  4. Ethernet ___________ has/have both a physical and logical bus topology.
  5. A routing protocol that supports route summarization must perform all except which of the following?
  6. A _________ routes between different autonomous systems.
  7. You have a total of five routers. ________ circuits are required to fully mesh the network, where every…
  8. The _________ is your network equipment, which includes the DCE (e.g., a modem) and the DTE (e.g., a…
  9. A _________ is a network that provides a secure connection from a company to other business partners.
  10. Which is not one of the three main functions of a layer-2 device?
  11. A Class A address has _________ host bits.
  12. When setting up an RJ-45 console connection, you need a RJ-45-to-DB-9 __________ adapter to attach to…
  13. Which metric components, by default, are used in IGRP? (Choose all the correct answers.)
  14. You are given a Class B network with a subnet mask of 255.255.255.192. How many hostaddresses are there…
  15. Which type of traffic is sent to a group of devices?
  16. A _________ uses Gigabit Ethernet as a media type
  17. Which prompt indicates that you are at User EXEC mode?
  18. Which frame field is different between ISO HDLC and Cisco's HDLC?
  19. Cisco routers generate LMI enquiries every _______ seconds and a full status update every _________…
  20. __________ allows you to distribute connection requests destined to a single IP address to multiple…
  21. A _________ provides a high-speed infrastructure to move data between storage devices and file servers.
  22. When connecting a router to a PC, use a __________ cable.
  23. The switch port that is chosen to forward traffic for a segment is called a __________.
  24. You are given a Class C network with 25 bits of networking. How many subnets do you have?
  25. The default encapsulation on a synchronous serial interface is _________.
  26. Private addressing is defined in RFC ______.
  27. The function of the MODE button is to __________.
  28. RIP has a maximum hop count of ____________ hops.
  29. You are given a class C network and you have four LAN segments with the following numbers of devices:…
  30. When you have configured PPP on an interface and use the show interfaces command, what state indicates…