Home

If the 1900 SYSTEM LED is _________, a system POST test has failed.

A. Green

B. Amber

C. Flashing amber

D. Flashing green and amber

Related Questions

  1. 172.16.240.256 is a class __________ address.
  2. The default encapsulation on a synchronous serial interface is _________.
  3. A Class A address has _________ host bits.
  4. A _________ routes between different autonomous systems.
  5. If the port status LED on a 2950 is ________, there is a physical layer connection problem.
  6. IGRP generates an update every ___________ seconds.
  7. You are given a MAC address of 01A2.0482.FE12. What is the OUI value in binary?
  8. A ___________ is basically all of the components, hardware and software, involvedin connecting computers…
  9. Choose the following that a standard IP ACL can match on.
  10. _________ describe(s) users that can connect to a network from any location.
  11. RIP has a maximum hop count of ____________ hops.
  12. A VTP server switch generates a summary advertisement every _________ minutes.
  13. You are given a class C network, 192.168.1.0/24. You need three networks with 60 hosts and two networks…
  14. When you have configured PPP on an interface and use the show interfaces command, what state indicates…
  15. Which frame field is different between ISO HDLC and Cisco's HDLC?
  16. You are given the following addressing information: 172.17.16.255/23. What type of address is this?
  17. The _________ reference point defines the connection between the NT2 and the NT1.
  18. Which type of routing protocol uses the Shortest Path First algorithm?
  19. The ___________ is the point where the carrier's responsibility ends and yours begins.
  20. Which prompt indicates that you are at User EXEC mode?
  21. __________ states that if a neighboring router sends a route to a router, the receiving router will…
  22. When setting up an RJ-45 console connection, you need a RJ-45-to-DB-9 __________ adapter to attach to…
  23. Which VTP mode(s) will propagate VTP messages?
  24. Which is an example of a hybrid protocol?
  25. A _________ connects two or more LANs in the same geographic area.
  26. What command activates the IP routing process?
  27. Distance vector protocols use ___________ to disseminate routing information.
  28. ___________ only translates one (and only one) IP address to another.
  29. You have a total of five routers. ________ circuits are required to fully mesh the network, where every…
  30. Which of the following trunking methods is/are proprietary to Cisco?

Please do not use chat terms. Example: avoid using "grt" instead of "great".