This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:
Limits
Fit
Specifications
Allowance
Correct Answer :
B. Fit
Related Questions
This is an angled surface used on cylinders to make them easier to handle:
Fillet
Taper
Chamfer
Lug
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
Primary
Secondary
Revolved
Successive
Using this as a communication and design review tool can help shorten the process and eliminate productivity barriers:
Development plans
Portable document files
The Internet and e-mail
Gantt charts
Geometric primitives include shapes such as ________.
Boxes
Cylinders
Wedges
All of the above
An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
Planar
Horizontal
Auxiliary
Orthographic
Dimensions are used on the elevation plan to describe ________.
Finished floor elevations
Roof overhangs
Roof pitch angles
All of the above
When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.
Linear dimension
Aligned dimension
Baseline dimension
Angle dimension
This is a flat or rounded tab protruding from a surface, usually to provide a method for attachment:
Lug
Boss
Chamfer
Spotface
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
Object
Hidden
Dimension
Miter
The site plan illustrates ________.
The floor plan
Where the house sits on the property
The roof plan
Where the garage and driveway are located
Which of the following is one of the basic types of welded joints:
T-joint
Rear joint
Angle joint
Groove joint
Generally, the units used on an architectural drawing are set to ________.
Architectural
Engineering
Metric
Civil
The distance a screw thread advances axially in one turn is the:
Lead
Pitch
Turn
Crest
Architectural drawings used to construct a house are often plotted with a scale of ¼ = 1'-0. What scale is this?
Quarter
Half
Full
Double
Isometric drawings are often used by ________ to help illustrate complex designs.
Mechanical engineers
Piping drafters
Aerospace engineers
All of the above
The text height for room names should be set to ________for a drawing that will be plotted to a scale of ¼ = 1'-0.
4
5
6
8
The principle views associated with orthographic projection are ________.
Front view
Right side view
Top view
All of the above
This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Computer-aided manufacturing
Computer-aided design
Computer-aided engineering
Computer-aided prototyping
This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
Dimension line
Extension line
Arrowhead line
Centerline
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
Type @3<45 and enter
Type 3 back slash and enter
Type 3 forward slash and enter
Type 3 and try to use the Dynamic Input readout to find the end point
In this type of dimensioning, allowance must be made for bends:
Angular
Tolerance
Datum
Sheet metal
The ________ is a standard element of a section view in a technical drawing.
Cutting Plane line
Section lines
Material hatch pattern
All of the above
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
Phantom
Hidden
Dashed
Center
The 3-D commands on the Modeling toolbar include ________.
Box
Sphere
Extrude
All of the above
The default position of the UCS icon is positioned at ________ on the AutoCAD grid.
0, 0, 0
10, 10, 10
20, 20, 20
None of the above
One way to evenly space dimensions on a drawing is to use the ________.
Dimension Space tool
Linear tool
Continue tool
Baseline tool
This type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:
Traverse
Contour
City map
Plat
In working drawings, these show all necessary information not given directly on the drawing with its dimensions and notes:
Document strips
Portable documents
Formatting forms
Title and record strips
The Offset tool should only be used for placing ________ in an isometric drawing.
Circles
Horizontal lines
Vertical lines
None of the above
When lettering a CAD drawing, for clarity you should limit the number of fonts to:
One
Two
Three
Any number