Greater than 7
Less than 7
Equal to 7
pH value has nothing to do with neutral solution
B. Less than 7
Chromium and nickel
Sulphur, phosphorus, lead
Vanadium, aluminium
Tungsten, molybdenum, vanadium, chromium
Carbon
Sulphur
Silicon
Manganese
Hot working
Tempering
Normalising
Annealing
Fixed structure at all temperatures
Atoms distributed in random pattern
Different crystal structures at different temperatures
Any one of the above
White metal
Solder admiralty
Fusible metal
Phosphor bronze
Eutectic cast irons
Hypoeutectic cast irons
Hypereutectic cast irons
None of these
1% silver
2% silver
5% silver
No silver
Flywheel of steam engine
Cast iron pipes
Cycle chains
Gas turbine blades
Brass
Mild steel
Cast iron
Wrought iron
Improvement of casting characteristics
Improvement of corrosion resistance
One of the best known age and precipitation hardening systems
Improving machinability
63 to 67% nickel and 30% copper
88% copper and 10% tin and rest zinc
Alloy of tin, lead and cadmium
Silver and chromium
Is a ductile material
Can be easily forged or welded
Cannot stand sudden and excessive shocks
All of these
94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe
92.5% aluminium, 40% copper, 2% nickel, and 1.5% Mg
10% aluminium and 90% copper
90% magnesium and 9% aluminium with some copper
Face centred cubic lattice
Body centred cubic lattice
Hexagonal close packed lattice
All of the above
Hard
Soft
Tough
Hard and tough
Magnesium alloys
Titanium alloys
Chromium alloys
Magnetic steel alloys
Does not effect
Lowers
Raises
None of these
Sulphur
Phosphorus
Manganese
Silicon
In which atoms align themselves in a geometric pattern upon solidification
In which there is no definite atomic structure and atoms exist in a random pattern just as in a liquid
Which is not attacked by phosphorous
Which emits fumes on melting
Duralumin
Y-alloy
Magnalium
Hindalium
The points where no further change occurs
Constant for all metals
The points where there is no further flow of metal
The points of discontinuity
RC 65
RC 48
RC 57
RC 80
Electroplating
Cyaniding
Induction hardening
Nitriding
Silver, copper, zinc
Silver, tin, nickel
Silver, lead, zinc
Silver, copper, aluminium
Strength
Stiffness
Brittleness
Toughness
Equal to
Less than
More than
None of these
There is no change in grain size
The average grain size is a minimum
The grain size increases very rapidly
The grain size first increases and then decreases very rapidly
Paramagnetic
Ferromagnetic
Ferroelectric
Dielectric
Greater than 7
Less than 7
Equal to 7
pH value has nothing to do with neutral solution
94% aluminium, 4% copper and 0.5% Mn, Mg, Si and Fe
92.5% aluminium and, 4% copper, 2% nickel and 1.5% Mg
90% aluminium and 90% copper
90% magnesium and 9% aluminium with some copper